Step By Step Instructions

Earrings:

1. Assemble 2 of these components:
   On a 1" headpin, place an angelite bead and a blossom bead cap, and then make a simple loop.(If using 1.5" headpins, make a wire wrap at the end instead.)
2. Open the loop on one ear wire and fasten one angelite /blossom assemblage. Repeat with the second ear wire and assemblage.

Necklace:

1. Assemble 5 of these components:
   On a 1" eye pin, place blossom bead cap, an angelite bead, and a blossom bead cap, making sure both bead caps are cupping the bead. Make a simple loop at the other end of the eye pin. (If using Artistic Wire, make a wire wrap at each end instead.)
2. Divide chain into links:
   Count out 6 links of chain four times.
3. Assembly -- Note: with the Vintaj chain, you won't need jump rings.  The links can be opened and closed without cutting the chain.  It is easier if you use 2 chain nose pliers, one in each hand, to open and close the loops of the chain, as it is fairly stiff.
   • Take one end of a blossom/angelite/blossom segment and attach it to the end of one 6-link chain.
   • At the other end of the 6-link chain, attach a second blossom/angelite/blossom segment.
   • On the other end of the second segment, attach the second 6-link chain.
   • Repeat these steps, connecting the remaining components from Steps 1 & 2. You should have one long strand of angelite segment, chain, angelite segment, chain, angelite segment, chain, angelite segment, chain, angelite segment afterward.
   • Connect the two angelite segments at the end with the remaining chain.
   • In the middle of the remaining chain, open the two center links and add the hook and eye clasp.

CONGRATULATIONS! ADMIRE YOUR BEAUTIFUL NECKLACE AND EARRINGS!