Instructions for Day at the Beach Necklace
Back to Day
at the Beach
Necklace Design Idea
Step By Step Instructions
- Assemble 6 of these components:
On a 24 gauge 1.5" gold eye pin, thread the following: a 3x5mm Aqua Satin
glass rondelle, an 11mm Golden Shadow Swarovski flat briolette, and an Aqua
Satin glass rondelle. Make a simple loop on the other end of your eye pin
- Assemble the main necklace:
Link a gold Starfish Connector to one of the Step 1 components, opening and
closing the simple loop on the eyepin. Now join another Starfish Connector
to the other side of your Step 1 component. Now connect all of the Step 1
components, alternating between the starfish and the component. Make sure
that all of the briolettes are placed the same way, with the pendant bottom
facing downward. When you finish, on each end there should be a starfish.
- Separate the gold textured cable chain into 2 equal parts (2-3/4" each).
No need to cut the chain; just open the links with your chain nose pliers.
Two pairs work better than one!
- Connect one end of one piece of gold chain to one of the starfish on the
end of the assembled components, opening and closing the loop of the chain.
No need for a jump ring! Connect one end of the other piece of gold chain
to the starfish on the other end of the assembled components.
- Attach one end of the vine clasp set to one of the chain ends, opening and
closing the end loop in the chain. Attach the other end of the vine clasp
set to the other chain end.
CONGRATULATIONS! YOU ARE READY FOR A DAY AT THE BEACH (OR THE OFFICE)!
Back to Day
at the Beach Necklace Design Idea
Copyright © 2013 Bead Inspirations. Powered by Zen Cart